Johnford

High speed, high performance, and high load capacities to lower your cost per part.

Full Line of Johnford

Johnford SL Series – 45 Degree Horizontal Slant Bed Turning Centers

Specification
Swing over the bed for the 11-machine series ranges from 15.7″ (5×9 mm) to 27.5″ (7×9 mm). Swings over the cross slide are 13″ (330 mm) and 21.5″ (546 mm). Distance between centers begins at 66″ (1,676 mm) and is 100″ (2,540 mm) on the largest machine. Bar capacity extends 1.7″ (43.2 mm) to 4.5″ (114 mm), depending on the machine.

Know more

Johnford ST Series – 60 Degree Horizontal Slant Bed Turning Centers

Specification
Swing over the bed for the 28-machine series ranges from 31″ (533 mm) to 47.2 ” (1,199 mm). Swings over the cross slide are 23.6″ (600 mm) to 39.4″ (1,000 mm). Distance between centers begins at 40″ (1,016 mm) and is 400″ (10,160 mm) on the largest machine.

Know more

Johnford HT Series – Horizontal Slant Bed Turning Centers with Dual Turret & 4-9 Axes

Specification
Johnford HT Series of twin-turret horizontal slant bed turning centers feature a one piece, 45˚ slant bed torque tube design. The torque tube, or hole cast through the center of the slant bed, maximizes rigidity and dissipates heat. For optimum strength and accuracy, the machines are cast from rigid Meehanite iron.

Know more

Johnford GT Series – Large Horizontal Slant Bed Turning Centers

Specification
The machine saddle casting is inclined at 60˚ to allow for the larger swing and capacities. Swing over the machine bed is 61″ (1,549 mm) and swing over the cross slide is 50″ (1270 mm). Distance between centers range from 40″ (1,016 mm) to 240″ (6,096 mm). All machines feature a single 12-tool turret and C-axis is optional.

Know more

Johnford LC Series – Large Flat Bed Lathes

Specification
The vertical 12-tool turret with a 12″ thick tool disk provides rapid indexing, as well as coolant through the tool holders. The turret has boring bar capacity of up to 6″.

Know more

Johnford SV and VMC (40 Taper) Machining Center Series

Specification
Four oversized box ways support the saddle and work table, maximizing X-axis accuracy over the full travel range of the machine, a key factor in maintaining part accuracy and precision. All sliding surface areas and gibs are coated with Turcite-B and hand scraped for precise fit.

Know more

Johnford SHV Series – Mold and Die Vertical Machining Centers

Specification
X-Y-Z travels for the four-machine series range from 33″ x 24″ x 24″ (838 mm x 600 mm x 600 mm) to 48″ x 28″ x 25″ (1219 mm x 711 mm x 635 mm).

Know more

Johnford SV and VMC (50 Taper) Machining Center Series

Specification
Johnford 50 taper SV and VMC super vertical machining centers are box-way, geared-head, C-frame machines that feature solid heavily-ribbed Meehanite cast iron construction to eliminate vibration and ensure excellent surface finishes and long cutting tool life. X-Y-Z travels for the 12-machine series range from 33″ x 20″ x 24″ (838 mm x 508 mm x 600 mm) to 120″ x 43″ x 32″ (3000mm x 1075 mm x 800 mm).

Know more

Johnford SV and VMC Twin Spindle Series

Specification
Two machines in the series have 20 hp spindles fitted with 40 taper toolholding systems, while largest machine has a 35 hp, 50 taper spindle. Distance between the spindles is 17″ (425 mm) on the smallest machine and 25″ (635 mm) on the others.

Know more

Johnford DMC Series – Moving Table Bridge Mills

Specification
Machine X-Y-Z travels range from 36″ x 36″ x 30″ (3455 mm x 3455 mm x 760 mm) to 196″ x 157″ x 32/42″ (4978 mm x 3989 mm x 812/1067 mm), with W-axis travel optional on the largest machines. Spindle tapers include CT-40 (HSK-63) and CT-50 (HSK 100). Spindle power, depending on the machine, ranges from 15 hp to 35 hp.

Know more

Johnford SDMC Series – Sliding Column Bridge Mills

Specification
The six machines in the Johnford SDMC series of heavy duty sliding double column machining centers feature a moving column and fixed table for unlimited table loads. With standard accessories the Meehanite cast iron machines weigh nearly 150,000 lbs. The machines can be configured to fulfill any large-part production requirements.

Know more

Johnford AHC-1600 Moving Column Table-Type Horizontal Machining Center

Specification
The AHC-1600 features precision-ground and induction-hardened box ways in the X, Y, and Z axes. All mating surfaces are coated with Turcite-B and hand scraped for fit. A pressurized automatic oil system force lubricates the ways. Large (2.0″/50 mm)-dia., pre-tensioned ballscrews and powerful servo motors achieve accurate positioning.

Know more

Johnford Table Type horizonal Boring Mills

Specification
Machine X-Y-Z travels range from 79″ x 71″ x 63″ (2006 mm x 1803 mm x 1600 mm) to 157″ x 118″ x 63″ (3987 mm x 2997 mm x 1600 mm). The smallest table size is 55″ x 66″ (1397 mm x 1676 mm), and the largest 98″ x 79″ (2489 mm x 2006 mm)

Know more

Johnford FBMC Series – Floor-Type Horizontal Boring Mills

Specification
Heidenhain scales are standard in all linear axes. The headstock features a 20.5″ (520 mm) x 17.7″ (450 mm) rectangular ram for the Z axis and a 6.3″ (160mm) bar for the W axis.

Know more